Top Dry
The advantage of Top Dry is that because the cut grass is deflected out through the hood to the mower's maximum swath width then the crop dries very quickly and within 2 days it is possible to pick up the silage before rain washes valuable nutrients away.

To obtain a good economy a cattle breeder needs low machine costs and high roughage quality. These requirements have been in focus while developing the Top Dry System.

Traditionally, the grass stays in the swath for some hours before it is spread out. As there is always a risk of rain, it can be very important to reduce the drying time more than just using the conditioner. With Top Dry the drying process starts immediately. This helps to yield a higher sugar content within the silage crop.

With Top Dry you can avoid the use of rotary tedders and sometimes the use of a rotary rake as well apart from when the crop is small or the chopper capacity is high.

Top Service
Inspecting the drum shafts and bearings could not be easier thanks to the Top Service design. You no longer have to strip down the top gearbox to gain access to the drum shafts. Simply remove the drum shaft individually for inspection. There is no need to go to a workshop, the repair is so easy it can be done in the field.
PE Conditioner
The PE fingers are Y-shaped and have been developed after extensive tests by the National Institute of Agricultural Engineering. It was discovered that this shape bruised the stems most effectively creating an airy swath, reducing the drying time and conserving the fodder value.

The conditioner fingers have a long life and are easy to replace.

Front Mounted

McM

 


GD 3200 FM

3.20m working width

70kw/95HP minimum tractor requirement

110kw/150HP minimum tractor requirement with front/rear combination

1000 kg

Left rotating PTO shaft (right rotating optional when ordering)

Free wheel

Front contour suspension

Support chain

CE protection

Top service cutterbar

Front mounted PE conditioner

8 heavy duty discs, 16 heavy duty blades

Variable 1.2m - 2.0m swath width

Friction clutch

Recommended for double swathing with trailed machine

GD 3200 FM Top Dry

3.20m working width

70kw/95HP minimum tractor requirement

110kw/150HP minimum tractor requirement with front/rear combination

1000 kg

Left rotating PTO shaft (right rotating optional when ordering)

Free wheel

Front contour suspension

Support chain

CE protection

Top service cutterbar

Front mounted PE conditioner

8 heavy duty discs, 16 heavy duty blades

Variable 1.4m - 2.8m swath width

Friction clutch

Top Dry system

Recommended for double swathing with trailed machine