This new series, introduced in June 2006, uses the same cab as the new Turbofarmer/Panoramic units, as well as their 102HP Deutz turbocharged engines.

The redesigned chassis means the new machines are still only 2000mm wide and have overall heights of 2150mm or 2000mm in the ‘L’ low profile models

Comparison Table for the TURBOFARMER

McM
Agriculture - Handlers - Individual models - 28.8 L
P28.8 L

Weight –

5520 kg

Overall length

4210 mm

Overall width

2000 mm

Overall height

1995 mm

Cab internal width

-

Ground clearance

-

Rated maximum load

2600 kg

Maximum lift height

5980 mm

Maximum forward reach

3210 mm

Lift height with rated capacity

-

Forward reach with rated capacity

-

Load capacity at maximum

-

lift height

-

Load capacity at maximum

-

forward reach

-

Travel speed (low/high)

-

Travel speed (low/high)

-

PLUS + TOP builds

-

Engine

Deutz

Power output 100hp(74.5 kw)

-

Aspiration

Turbo

Download a Data sheet

 


Cab
• Complies with ISO 3449 (FOPS) and ISO 3471 (ROPS) standards.
• ‘4 x 1’ electro-mechanical joystick with roller-operated proportional control of extension and auxiliary services.
• Adjustable steering wheel.
• Roof and front window mounted sun blinds.
Boom
• Telescopic, with sections sliding on adjustable low-friction pads.
• Hydraulic extension mechanism, hydraulic pipes and electrics are totally enclosed
within the boom assembly to ensure maximum protection and reliability.
Quick-attach carriage
• The Tac-Lock quick attachment fitting system is hydraulically controlled from the cab.
• Standard double-acting hydraulic service, with quick couplings, for the operation of hydraulically powered attachments.
Forks
• Floating type: length 1200mm, section 130 x 50mm.
• Fork spacing is manually adjustable between 450 and 1050mm.
Steering
• Four drive/steer wheels, with automatic wheel synchronisation in the event of any misalignment and selection of three steering modes from the cab.
Engine
• Direct injection, water cooled 4 cylinder Deutz Euro 2 turbocharged diesel engine producing 74.9kW (102HP) at 2400rpm (97/68/CE).
Transmission
• Hydrostatic with electronically controlled variable displacement pump.
• Continuous and automatic speed variation, from zero to maximum speed, solely with the accelerator pedal.
• Two-speed mechanical range gearbox.
• Inching-Control pedal to proportionately reduce travel speed whilst maintaining high engine speed for hydraulic operation e.g. during loading operations.
• Finger-Touch system makes it possible to change between forward and reverse direction with the driver keeping both hands firmly on the steering wheel.
• Permanent four-wheel drive.
• Portal axles ensuring excellent ground clearance.
Braking system
• Disk service brakes on all 4 wheels, hydraulically operated and acting on the differential output shafts.
• Disk parking brake with automatic locking feature and hydraulic release control, acting on the main transmission shaft.
Hydraulic system
Gear pump equipped systems (L, L PLUS and PLUS models)
• Maximum operating capacity: 100lpm.
• Working pressure: 210bar.
Load-Sensing pump equipped system (TOP models)
• Maximum operating capacity: 108lpm.
• Working pressure: 210bar.
Electrics
• 12V system with 100Ah battery and 90A alternator.
• Full road lighting and rotating beacon.
• Four working lights on the cab (two front lights and two rear).
• Manual battery isolator switch (optional automatic switch).
Service capacities
• Hydraulic oil: 85 litres
• Diesel fuel: 100 litres
• Hydrostatic oil: 12 litres
• Engine oil: 8.5 litres
• Coolant: 12 litres
Tyres
• 405/70-20 (optional 405/70 LR24).
Available options
• Front and/or rear axle differential lock.
• Automatic battery isolator.
• Manual control air conditioning.
• Windscreen wiper on the roof window.
• Pneumatic seat.
• BSS hydraulic boom suspension system.
• Towing homologation (depending upon national road regulations).