Överum CVL-ploughs
The lift requirement for the Överum CVL-plough is below one third compared to a corresponding fully mounted reversible plough. The furrow width can be adjusted to different ploughing conditions. 14", 16" or 18" (35, 40 or 45 cm). The Överum CVL-plough is easy to set. Hydraulic front furrow adjustment is convenient when straightening bends. This function is also a great help when ploughing headlands, to get good and even connections between the passes.

Överum DVL-ploughs
Extra robust frame construction for heavy duty ploughing conditions with tractors up to 250 hp.Adjustable furrow width 16", 18" or 20" (40, 45 or 50 cm). Extremely good clearance, 1.0 m interbody and 75 or 80 cm underbeam. Means extra space for effective skimmers giving optimum weed control and non stop ploughing in heavy trash. Extra accumulator in the hydraulic stone release system with higher precharge. Increases the working range for soft and gentle stone release. (DVL 6 and 8 H).

Överum CXL Wagon plough
Överum's new plough programme, CXL wagon ploughs, implies a completely new concept in ploughing. The wagon plough makes it possible to pull a large plough with a relatively small tractor. The CXL models are designed for tractors up to 180 hp (135 kW). The wagon plough programme has been developed for easily ploughed soils and consists of: 6 to 8 furrows with hydraulic stone release system (H) 6 to 9 furrows with a safety shear bolt (F). A wagon plough implies that the rear of a semi-mounted plough has been fitted with two wheels in a wagon, behind which is attached a 2- or 3-furrow mounted plough. Together they form a large plough with a uniform weight distribution around the wagon. The turning of the plough will therefore be very wellbalanced.