The MAJOR Centre Mount Topper is a fully gear driven machine fitted with high speed rotors completed by twin cut swinging blades.

The contra-rotating swinging blades are timed ensuring a stripe free cut. Cutting height is easily adjusted by resetting the skids and castor wheels (optional) at the desired height.

Model	9FTGDX
Working Width	2.74mm (9ft)
Blade Tip Speed	6631 m/min 21747 ft/min
Weight	520 kg
Input PTO Speed	540 RPM
Cutting Range	1/2" to 10" (12-250mm)
Blades	8
Rotors	2
Power Requirements	80HP Max;  35HP Min
Cutting Height	205mm Max;  12mm Min

Other Outstanding Features:

• Heavy Duty shaft drive system and gearboxes;
• Rubber shock absorbers between gearboxes;
• Shear-bolt protection incorporated into the drive system;
• Drive line is totally enclosed by guards for added safety;
• Absence of belts and pulleys means low maintenance and no adjustments;
• Twin cut blades are synchronised at 90 degrees and overlap paths by 3", eliminating any uncut strips being left;
• Blade tips are allowed to swing in hardened bushings;
• Comprehensive MAJOR guarantee;
• Cutting range from 1/2" to 8" or 12mm to 200mm.

Twin cut blades are fitted as standard offering finer cut and better spread than competitors.